It really just depends on your style and budget as to which backsplash is right for you. As for the materials, you can go with a natural stone, ceramic tile, metal tiles, mosaic tiles arranged on a mesh backing to hold it together, glass tiles, and more. You can go bold if you choose to make a statement and have it really be a focal point of the kitchen or you can go with a more neutral style and have it be just a subtle accent to the rest of the kitchen. There are tons of options and colors when it comes to a kitchen backsplash. I didn’t have any tiles that wouldn’t adhere, but I had to glue down some of my existing flooring that was coming up before I could put the new tile over it.When you think of your dream kitchen, there is more than likely a nice backsplash in your mental image of that perfect kitchen.
Use the glue if you find there are any tiles that are not adhering, and then use the roller over it. Start with the next tiles around the center, and then you can go line by line, or whatever process works for you, rolling each tile to adhere. Roll the center tile with the tile roller to be sure that it is completely adhered.
The tiles are pretty easy to deal with and can be peeled back up easily if you make a mistake. Make sure that you install the tile back in the exact center. 4) Begin Installingįinally, you can peel of the back of the center tile. But my house was about the same temperature as the store, and I didn’t have them delivered or sitting out in the heat or cold. I didn’t do this, and didn’t have any problems with the tiles sticking. *The directions on the box say to lay the tile out flat for 48 hours before installing to acclimate to any temperature changes. 3) Lay all of the tile out first, do not adhere! Any tiles with defects can be used for cut pieces on the edges. Be sure that the pattern lines up exactly with each tile (you may need to rotate each tile until it lines up). Lay all of the tile out first, with the exception of any edges that need to be cut. This will give you a guide to be sure that the next rows of tile will be straight and level.ĭoing this one time should give you enough of a guide to get started, but if you are nervous, then continue the process of drawing very straight and level lines every 12 inches, or whatever dimension your tile is. This line needs to be straight and level as possible. Using a laser level and chalk line, or very long straight edge, draw a line across the room both out from the top, bottom, right, and left sides of your center tile. Trust me, and do it!!! Your tile will turn out much better! ) 2) Draw a line across the room both horizontally and vertically To properly lay tile, you start in the center of the room and work out, so you will want to know where the exact center is.
Line the first piece of tile up with the center mark on the tile and the center mark of the floor as best you can. Then, take a piece of the tile and lightly with pencil mark the center point of the tile.
Where the half-way point of the length and width intersect is your center point, mark it. Then, measure the width of the room, and the length of the room, and figure out the half-way point of both. To mark the center of your room properly, everything needs to be moved out. But since there was nowhere in the house to move it, I just scooted them all the way to one side of the room, laid the tile, and then all the way to the other. To do this properly, we really needed to move the washer and dryer out of the room. (This is one of the steps that I failed to do. ~Chalk line-strongly suggested, but not needed ~Laser level-strongly suggested, but not needed Also be sure to include some extra for messups! Be sure to look at the lot numbers on the back of the box, and buy the same lot numbers. ~Enough boxes of tile required for your square footage.
0 kommentar(er)
